Marketplace

At the conclusion of the contract

At the conclusion of the contract

At the conclusion of the contract

Sb:99.90%min

TiO2 Content 93%min

TiO2 cotent: 46% min, Fe2O3:20% max, Moisture:1%max

Sb:99.85%min

Si:72%min，75%min, C:0.2%MAX S:0.02%MAX P:0.04%MAX SIZE: 10~30MM OR 10~50MM OR 10~100MM OR 50~100MM 90%MIN

Molybdenum is doped with bits of lanthanum oxide particles (0.3% or 0.7%), and then the so-called laminated-formed fibrous structure is formed. This particular microstructure can maintain stable even the temperature is up to 2000 ℃. And thus, even used in extreme conditions, the molybdenum-lanthanum oxide is also creep-resistant. We mainly process these alloys into high-temperature furnace components, such as twisted wire and other metal wire, sintering and annealing boat or evaporator coil. In the lighting industry, molybdenum-lanthanum oxide is also used as guard lines and feeder lines.

Cr:50%min, C:4~8%

In:99.995%min

Tungsten copper is produced with the selection of fine tungsten and copper powder, and soaked by the first-class sintering refining process. Combined with the advantages of tungsten and copper, it has the characteristics of high temperature resistance, erosion, high strength, heavy, good conductivity, being easy to machine and transpiration cooling. It can be used as electrical contacts, electrodes, for electronic packaging, and in other occasions which require of thermal conductivity properties and high temperature.

aPre-Avo1

Mn:99.5%min

Si:72%min