Marketplace

AlV75 V:72-78% Fe:0.35%max Si:0.30%max C:0.15%max O:0.20%max Al: remainder

Specs: P:26%.C:0.025% S:0.005% 1000kgs/bags Size: 3-15mm, 5-20mm, 10-50mm 25-70mm,50-100mm

45#Ferro Silicon Powder Spec.: Si 43-47 Al 0.25 S 0.05 P 0.03 Mn 1 C 0.6 I t widely used in welding industry,mill-industry,chemical industry,metallurgy industry,etc.

AlV75 V:72-78% Fe:0.35%max Si:0.30%max C:0.15%max O:0.20%max Al: remainder

Silicon Powder Size:0-3mm Packing:1mt/big bag Si 50min

Foaming slag inhibitors has good inhibitory effect on BOF slag foaming slag splashing.It can prevent and control the extent of splashing effectively,meanwhile reduce the metal consumption in blowing the metal material processand creat favorable conditions for saving cost.You will improve the furnace safety operation by using this foaming slag inhibitors obviously. Side-effects, Pollution and dirty molten steel will be prevented by adding the foaming slag inhibitors and make your production process more effective.

fe 60% + composite lumps

We are the producer for the following products, FeV80 V:75-85% Al:4.0/2.0/1.5max C:0.2max S:0.05max P:0.06max Si:2.0max

1.Usage ferrosilicon 15% is used extensively in the dense media separation process in both the metal recycling and mining sectors. 2.Sizes Fine, coarse, Cyclone 60. 3.Character Low oxygen content,sphericity or similar sphericity,very good spreadability and liquidity. We can provide sample with different chemical composition and granularity upon request.

Co 8% +/- 0.1% Fe < 0.20% Mn < 0.10% Cl < 0.04% NO3 < 0.04% As < 5 ppm Hg < 5 ppm pH > 1.8 S.G. <1.30 Total water insolubles < 0.05%

mn - 75%min, si - 1.5%max, c - 8%max, p - 0.25%max, s-0.03%max size 10- 50 mm or 10-100mm

3303# 4403# 553# 441# 2202#

99.9%

We are the producer for the following products, FeV80 V:75-85% Al:4.0/2.0/1.5max C:0.2max S:0.05max P:0.06max Si:2.0max

V ：62-68 Al ：32-38 B ：≤0.0025 C ：≤0.05 Cr ： ≤0.05 Cu ：≤0.03 Fe ： ≤0.30 Mg ：≤0.02 Mn ：≤0.05 Mo ： ≤0.1 Ni ：≤0.05 P ：≤0.01 S ：≤0.01 Si：≤0.2 W ：≤0.01 H ：≤0.015 N ：≤0.04 O：≤0.2. 2.Particle size : the sizes available on request 3. Packaging specification Volume: 100 kg in 50-liter steel drum(Inner packing is plastic bag) 4. Inspection: 4.1 All material is 100% visually inspected to verify metal is clean and free of debris. 4.2 All material is 100% inspected by magnetic separation to verify metal is free from magnetic inclusions. 4.3 All material is 100% blacklight and 100% x-ray inspected to verify metal is free of slag and high-density inclusions.